l2:BD
The Layer 2 Bridge-domain, which identifies the boundary of a tenant’s bridged/layer 2 traffic. This is similar to a VLAN in a traditional layer 2 switched network.
Telemetry Sensor Path(s)
Configurable Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | PERMITTED VALUES |
|---|---|---|---|
| BdState | l2:DomAdminSt (scalar:Enum8) |
Bridge Domain State can be active or suspended | SELECTION: 1 - suspend 2 - active DEFAULT: active |
| accEncap | base:Encap |
The Layer 2 access encapsulation (VLAN or VNID). | SELECTION: unknown, vlan-%d or vxlan-%d |
| adminSt | l2:DomAdminSt (scalar:Enum8) |
admin state | SELECTION: 1 - suspend 2 - active DEFAULT: active |
| bridgeMode | l2:BridgeMode (scalar:Enum8) |
The Layer 2 bridge-domain parameter mode used by the node for enabling classical bridging or bridging with the IP address. | SELECTION: 1 - ip 2 - mac DEFAULT: mac |
| ctrl | l2:DomCtrl (scalar:Bitmask32) |
The control state. | SELECTION: 0 - none 1 - untagged 2 - policy-enforced DEFAULT: none |
| fabEncap | base:Encap |
The Layer 2 bridge-domain Fabric encapsulation (VNID). | SELECTION: unknown, vlan-%d or vxlan-%d |
| fwdCtrl | l2:FwdCtrl (scalar:Bitmask32) |
The Layer 2 bridge-domain forwarding controls. | SELECTION: 1 - mdst-flood 2 - arp-flood DEFAULT: mdst-flood |
| fwdMode | l2:FwdMode (scalar:Bitmask8) |
The Layer 2 bridge-domain parameter mode used by the node for enabling forwarding modes. | SELECTION: 1 - route 2 - bridge DEFAULT: route,bridge |
| longName | scalar:Bool |
Enable or disable long name of 128 characters for VLAN | SELECTION: true or false DEFAULT: false |
| macPacketClassify | l2:PktClassify (scalar:Enum8) |
Vlan mac packet classify | SELECTION: 0 - disable 1 - enable DEFAULT: disable |
| mode | l2:DomMode (scalar:Enum8) |
Vlan mode | SELECTION: 1 - CE 2 - FabricPath DEFAULT: CE |
| name | naming:Name256 (string:Basic) |
The name of the object. | MAX SIZE: 128 |
| xConnect | l2:XConnect (scalar:Enum8) |
Enable Cross Connect on VLAN | SELECTION: 0 - disable 1 - enable DEFAULT: disable |
Operational Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| BdOperName | string:Basic |
OperName | A sequence of characters |
| createTs | scalar:Date |
creation time | DATE FORMAT: %Y-%m-%dT%H:%M:%S.%f%z |
| hwId | l2:DomId (scalar:Uint32) |
Internal domain id | RANGE: [1 , 4096] |
| operSt | l2:DomOperSt (scalar:Enum8) |
oper state | SELECTION: 1 - up 2 - down 3 - unknown DEFAULT: down |
Internal Properties
| PROPERTY NAME | DATA TYPE | DESCRIPTION | POSSIBLE VALUES |
|---|---|---|---|
| bdDefDn | reference:BinRef |
The bridge domain name. | |
| controllerId | aggregate:ControllerIdBitmap (base:BitArray) |
Controller ID for Vlan | ARRAY SIZE: 256 |
| id | l2:DomId (scalar:Uint32) |
domain id | RANGE: [1 , 4096] |
| modTs | mo:TStamp (scalar:Date) |
The time when this object was last modified. | SELECTION: 0 - never DEFAULT: never |
| status | mo:ModificationStatus (scalar:Bitmask32) |
The upgrade status. This property is for internal use only. | SELECTION: 2 - created 4 - modified 8 - deleted 16 - replaced |